Koos Kaspers.nl :: How to iSync a Nokia 6300

How to iSync a Nokia 6300

[ Mac OS ] by Koos @ 13.04.2007 16:48 CEST

It appears that Mac OS X’s iSync does not natively support the Nokia 6300. A closer look revealed that several other Nokia phones that run the exact same operating system as the Nokia 6300 are supported in OS X, so therefore, the 6300 is actually supported. We are going to modify iSync, so its also seeing the 6300 as a supported phone.

In order to get this device working with iSync, follow these steps (it doesn't seem to work with Snow Leopard 10.6 !):

Quit iSync if its running. Right-click on the iSync application in your /Applications folder, and select “Show Package Contents”. Navigate through the folders to Contents -> PlugIns -> ApplePhoneConduit.syncdevice -> Contents -> PlugIns -> PhoneModelsSync.phoneplugin -> Contents -> Resources. Back-up the MetaClasses.plist file by clicking on it, and select File->Duplicate from the Finder menu. Next, open MetaClasses.plist with a text editor.

The Nokia 6280 runs Series 40, 3rd edition with Bluetooth and USB, exactly the same as the 6300. We're going to copy the XML entry of the 6280 model, and changing it a little bit, so the 6300 is getting recognized by iSync.
The 6280 XML entry starts with “family.com.nokia.series40.3rdEd.bus.usb-bt”. So make a copy of it’s XML entry, and replace 6280 to 6300, and insert the new entry below it. Here is my Nokia 6300 definition or just use my complete MetaClasses.plist file.

In order to get an 6300 icon displayed in iSync, we need to add a tiff file to the same directory as the MetaClasses.plist
The icons are 60×60 pixel tiff files with transparent back-grounds. Here is the icon file that I used for the 6300, just put it in the same folder.

Save and close the MetaClasses.plist file and start up or restart iSync. Make sure that Bluetooth is enabled on your phone. Select “Add Device” from the iSync Devices menu. iSync should find your Nokia 6300, and display the icon that you've added.

For fixes regarding Birthdays and Contact Photos, take a look at this blogpost at dabgotra.com.

Comments (307) Permalink

Comments

lars @ 16.04.2007 22:38 CEST
thank you man! works perfectly.

Bigboysdad @ 18.04.2007 15:55 CEST
Wonderful! 1000 thanks. If only read this article before paying for one of those alternative isync programs

Pioneer @ 18.04.2007 22:24 CEST
Must be the most useful hack I ever used. It worked straight away. And this after hours and hours and hours I usually spent trying to sync my new toys with iCal. Big THANK YOU!

Olivier Grimbert @ 19.04.2007 16:23 CEST
Super ! Lot of thanks, my new bought nokia... works well ! I thougt I'll found this kind of info on the net and you are the one. From france.

Charlie Anderson @ 19.04.2007 19:06 CEST
Works perfectly. Thank you.

Dash @ 22.04.2007 09:21 CEST
Doesn’t seem to be working for me. I’ve tried the hack a couple of times, I bought the plugin from the German website, every time I just get an “unexpected” iSync error about halfway through syncing.

Maybe my phone OS is out of date? It’s V 04.20, 05-12-06 RM-217.

Koos @ 22.04.2007 11:01 CEST
@Dash
Did you tried to reset the sync history in the iSync prefs ?

Angus @ 23.04.2007 11:26 CEST
Awesome tips, thanks heaps! No second class Mac citizen for me!

If you lack Bluetooth, you can also get the 6300 to sync via USB if you change this section:

com.apple.usb.vendorid-modelid
0x0421/0x045A

To this:

com.apple.usb.vendorid-modelid
0x0421/0x04F9 (At least on my Australian-spec 6300.)

I also found that the name of the TIFF file was case sensitive. I had to match the casing before it showed up right.

Again, awesome tip. Thanks heaps!

Gary @ 23.04.2007 14:57 CEST
thanks! this was fantastically helpful and worked first time.

Karl @ 23.04.2007 21:07 CEST
awsome!

Edwin @ 24.04.2007 08:52 CEST
Thanks, this is great! I wish I discovered this earlier though: I already bought a third-party plugin for this but I find your solution so much more "elegant".

I do have a problem though, whether with your or the third-party solution. Whenever I have any whole-day events, they show up as appointments from 8pm to 8pm on my phone. Why can't they show up as full-day notes? I didn't encounter this problem when I used iSync with my Nokia 6280. I'm guessing this has something to do with my time zone (I am at GMT +8)? Any pointers would be much appreciated! Thanks in advance!

Koos @ 24.04.2007 09:27 CEST
@Edwin

I'm encountering this problem too.
All-day events show up as appointments from 14:00 to 14:00.. very weird..

Maybe someone has a fix for this..

viv @ 24.04.2007 12:48 CEST
Absolutely works like a wonder, Many thanks

Edwin @ 24.04.2007 16:10 CEST
Thanks Koos for your post! At least I know I'm not alone! I wonder if it has anything to do with the firmware of the phone? Mine is the same as Dash's i.e. V4.20 5-12-06. Which version do you have?

Koos @ 24.04.2007 16:13 CEST
@Edwin
My phone's firmware version is V 04.70 and production date: 24-01-07.

David @ 24.04.2007 18:42 CEST
Thanks Koos for the post. Question, is there somewhere I need to store the nok6300.tiff file for my device to be recognized. I followed your instructions, inserted your 6300 XML entry underneath the 6280 entry, saved the MetaClasses.plist file, and then saved the new .tiff file to the desktop. Upon adding a new device in isync i get no device found. You can see I'm somewhat of a novice. Thanks for any suggestions.

Koos @ 24.04.2007 18:50 CEST
@David
Thanks for your comment !
I didn't even knew the icon didn't work!
The icon has to be spelled in capital letters.
I've reuploaded the correct named file.

You have to put the NOK6300.tiff file in the following directory: iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/PlugIns/PhoneModelsSync.phoneplugin/Contents/Resources

Erling Myrland @ 25.04.2007 01:14 CEST
I'm sorry but I can't figure this out.
I've copied the NOK6300.tiff file in the designated directory. And it seems to be fine.

However do you want me to copy and paste your Nokia 6300 text in after the 6280 text? Or should I replace the whole 6280 entry with the 6300 text?

Dash @ 25.04.2007 03:08 CEST
Thanks Koos, I'm not sure what I did but it's working now.

Koos @ 25.04.2007 08:02 CEST
@Erling Myrland
You can do both, but the most usual way is to place the new entry under the 6280.

Alex @ 25.04.2007 13:31 CEST
This is a wonderful hack Koos – thanks!

tenthofjune @ 26.04.2007 15:17 CEST (Trackback)
Having changed from a Sony Ericsson k750i to a Nokia 6300, I was amazed that the Nokia did not support the wholesale copying of my phonebook by Bluetooth, so I had to find another way round. This was to set up a temporary account on my Mac and use iSy...

dave mc @ 27.04.2007 00:41 CEST
your a legend!!! Works sweet! Thanx a mil!

Martin @ 27.04.2007 19:04 CEST
Thanks, I am complete moron with computers but your instructions made it easy and it worked first time, thanks a million

KAVANAKI @ 28.04.2007 16:27 CEST
Hi, this worked perfectly THANKS.
do you know how i can sync music on my mac to nokia 6300..

Koos @ 28.04.2007 16:36 CEST
@KAVANAKI
You can just hook up your phone with the usb cable and transfer the music to you device. This way is much faster than transfering those files via bluetooth.

In these comments is a fix for getting usb to work with iSync.

DLP @ 28.04.2007 18:18 CEST
Took 15mins...perfect solution. Much appreciated. You are a scholar and a gentleman for letting us know!

Senti @ 30.04.2007 10:20 CEST
I am keen to learn how to do this but I think I have blown it. I cannot find "6280" in the Metaclasses.plist files. so I do not know where to insert your "6300"
XML entry.

I am very confused and not in the least computer savvy. I would welcome a more pedestrian breakdown. Graphics really help!

I will crack this somehow

Koos @ 30.04.2007 10:24 CEST
@Senti
Do you run the latest version of Tiger ?
If you screwed it up, you can just restore the iSync.app from your Tiger DVD with an application called Pacifist. If you still got problems, I can upload my complete Metaclasses.plist for you...

Senti @ 30.04.2007 10:32 CEST
Thanks for your quick response Koos. I do run the latest version of Tiger. I also made a copy of the MetaClasses.plist before I tinkered. Will I need to restore iSync.app?

Koos @ 30.04.2007 10:38 CEST
Yes, just replace the backup of your iSync.app,
and try again.

Here's my Metaclasses file.
Make sure you put it in the correct directory, add the tiff file and your done.

Senti @ 30.04.2007 10:59 CEST
Oh yea baby. Thanks Koos you have blown me away. IT WORKS. Your expertise is great. What is also great is your generosity to share your knowledge. You have inspired me to be generous and share my skills with others around me. Awesome.

Thanks

Koos @ 30.04.2007 11:18 CEST
@Senti,
Your welcome !

KavANAKI @ 30.04.2007 12:11 CEST
Hi Koos, what application do i open on a mac to transfer music files to the phone. cheers,

Koos @ 30.04.2007 16:02 CEST
@KavANAKI
Just connect the phone via usb, and set up the phone in data transfer mode (pop-up will appear on the phone after connecting) and browse your device with the Volume which appears on your desktop.

Wazza @ 01.05.2007 16:06 CEST
Thanks. Worked a treat and it's the first time I've ever used iSync on my Mac too! I was going to buy a different (less expensive) Nokia until I found your instructions last night. One would think it is in Nokia's interests to release this themselves.

Once again - thanks!

Mikkel Neimann @ 01.05.2007 22:35 CEST
Hi!
This doesn't work for me.
I've place the MetaClasses.plist with yours, i've reseted the iSync history, placed and renamed the .tiff.
What more can i do?

Koos @ 01.05.2007 22:41 CEST
@Mikkel Neimann
Do you use USB ?
For USB you need to change the code, check the comments for that.
Connecting with Bluetooth has to work immediatly.

Mikkel Neimann @ 01.05.2007 22:44 CEST
I tried through the Bluetooth.
I must be doing something wrong, 'cus it seems to work for the most of people.

Koos @ 01.05.2007 22:47 CEST
@Mikkel Neimann
Did you already paired your device with the bluetooth utility in OSX ?

Mikkel Neimann @ 01.05.2007 22:53 CEST
No, do i have to?

mikkel Neimann @ 01.05.2007 22:56 CEST
It fucking worked, at last.
Thanks a lot dude!

Declan @ 05.05.2007 06:45 CEST
This looks just what I need. However when I open the contents box I find all of the folders ("plugins", etc) empty, and so can't find the metaclasses file. Any idea why? Thanks

Koos @ 05.05.2007 09:23 CEST
@Declan,
Are you using Mac OS Tiger ?
And are your 100% sure you're folders are empty ?

You must browse to the exactly given path, otherwise it won't work..

Declan @ 05.05.2007 09:42 CEST
Koos, i'm using 10.4.9 - that's tiger, right? and yes i'm sure they are empty. very strange...

Koos @ 05.05.2007 09:45 CEST
@Declan
Indeed very strange..
Do you have another mac ?
Try to replace the iSync app from another machine.. or extract the iSync application from your tiger dvd with Pacifist (Application).

Declan @ 05.05.2007 10:12 CEST
Koos, Okay, think you are right, will try it with another machine. One other quick question - I can't connect the laptop to the internet using GPRS either. I get a message on the phone that says 'subscribe to packet data first'. i'm using your settings and have tried different modem scripts. i wonder if this is a problem with the mobile phone company? it worked with my last phone, a 6210...

Koos @ 05.05.2007 10:35 CEST
@Declan
I don't have experience with GRPS, since I don't use it.
Can't help you with that..

Jacob Yarl @ 05.05.2007 10:51 CEST
At first I had the same problem connecting my brand new 6300 to the net, but I found this:

http://klauskjeldsen.dk/2007/05/04/setup-internet-connection-via-bluetooth-using-nokia-6300-on-mac-os-x/

Somehow it works now, can't put a finger on what I did wrong the first time...

moon.calf @ 08.05.2007 00:46 CEST
Hi

Almost there. Want to transfer a tune from mac osx to nokia6300 via bluetooth. Have copied exact. When trying to add device mac says 1 item found and has the pic of phone but says mac does not support the nokia6300. Any ideas? Dont have usb.
Thanks.

Koos @ 08.05.2007 07:59 CEST
@moon.calf
This has nothing todo with syncing.
Just browse to your file, and select it.
After that, press cmd (apple) + shift + b, select your device, and click 'send'.

Gregor @ 08.05.2007 19:44 CEST
Hi,

i tried out your "hack", but somehow i made a mistake and my Nokia 6300 is not working to sync it and what is more worse is that after i chnaged these entries even my 6280 is not working anymore. What makes me a bit wonder from the beginning is that the structur of the folders was not the same like you explained.... and i´m not a proffesinal in Mac OS....
Maybe someone can help me abit and give me tips, please?
Thanx Gregor

Koos @ 08.05.2007 21:18 CEST
@Gregor,
Do you use Mac OS 10.4.9 ?
If so, something must be messed up with iSync.
Try to extract the original application from your install DVD by using an application called 'Pacifist' and try again, or just get the application from another mac.

Gregor @ 09.05.2007 06:38 CEST
Thanx for your answer, by the time (in the night), i downloaded your file from your website and i just copied it in my directory and suddenly the sync with my "old" 6280 worked again and even the 6300 is working now too!!! But i don´t know why, because i copied my file and yours on my other computer (win xp) and i checked them and they are exactly the same, only my one had the symbol of a strawberry (from omnitron) and your was blank....

Brad @ 09.05.2007 18:40 CEST
Hi, thanks so much, this worked brilliantly for iSync. I love this phone, and I can send text messages from Address Book, but for some reason incoming texts do not display on my computer. Any ideas?

Chris Blunden @ 09.05.2007 18:49 CEST
Complete Life-Saver. Brilliant! Thanks very much.

DJ Brown @ 14.05.2007 17:09 CEST
I love you. 20 minutes and I was up and running. Thanks.

anita @ 22.05.2007 04:35 CEST
hey... thank you very much for this... ive never done anything like it... just followed your very clear instructions to the letter and it works like a charm!

:-)

moon.calf @ 22.05.2007 16:20 CEST
Hi

Thanks for your info. After studying what the file formats needed to be it worked like a dream. This basic info. should be in the manual! You are a genius!

Nick Lightbody @ 23.05.2007 16:02 CEST
Brilliant, your explanation is perfect and it works first time, I just inserted your complete Meta file and the icon.

Many thanks, much appreciated.

Nick

Azkkr @ 23.05.2007 21:49 CEST
Thank you very much. This link and discription is wonderfull!!
You did a great job!

Alex @ 25.05.2007 21:16 CEST
Hi everyone!!!! look I changed my v 4.20 to 4.71 ( the latest for this moment) and you know... not eny serious changes has been made... just that simple folders were renamed, and new version got player like walkman's, ( i mean when in music library we need to find something we need, we may do it by pushing right button - next playlist will be showed to you...... BUT THE MAIN PROBLEM OF THIS NEW VERSION 4.71 IS THAT display of my new 6300 get worsened!!!! basic pictures NOW are not so expressly, i can see now each pixel ((((((((( every little square !!!! it's killing me!!! HELP ME, HOW SHOULD I DO ?????

Xavi @ 26.05.2007 21:14 CEST
Very helpful, thanks! I got used to use iSync, and I was dissapointed that my new phone was not supported! I do not know how I ended up in your web, but your explanations worked perfectly, and if I can make this work, then anyone can. Thanks from London.

tony @ 29.05.2007 17:43 CEST
Anybody else seeing memo's being sync'd as meetings scheduled at 13:00 for 0 minutes? they sync as a memo back to the apple but not the other way, it worked fine on a 6280 & 6288 (the file was modified in a similar way)

thanks

Jogo @ 31.05.2007 15:35 CEST
Hi Koos - thanks for your help! Although it seems to work with most other people posting here, I still have a problem: my phone is recognized by isync, but whenever I start syncing an error occurs immediately and isync aborts syncing. I already resetted the isync history. No changes. My PhoneOS is V04.70/24-01-07. I use Entourage on my Mac, is that a problem? Any conclusion?? HELP!

Koos @ 01.06.2007 21:06 CEST
@Jogo

Yes, there's a change Encourage is causing this problem.. try to sync one time with iCal, so you can see for yourself what application is responsable for these errors.

fred @ 02.06.2007 01:25 CEST
thanks a lot. I finaly have found what I've been searching for a very long time!!!!

Adrian @ 05.06.2007 07:52 CEST
I have a 6275 , same operating system as the 6280 and 6300. I tried the same just adding 6275 instead of 6300
Didnt work : (
I use USB I dont have BT.

el-sid @ 06.06.2007 01:20 CEST
hey, i koos i followed ur instructions but it didnt work completely. when i try to add device, i sync says 1 device found, but it does not establish a connection.
any idea?

Adrian @ 06.06.2007 18:15 CEST
Same as el-sid
Ok, I bought a BT , now I got a message "one device found this phone is not compatible with isync" and the 6300 tiff aded" ?? I alredy triple check the definition.??

Koos @ 07.06.2007 08:11 CEST
Try to download my complete MetaClasses file and put it again in the right folder, described above.

When it still fails, try to delete the iSync preference files.

Sebastian @ 11.06.2007 10:46 CEST
Thank you, perfect solution!
Regards, Sebastian

Dave Edwards @ 11.06.2007 12:16 CEST
Thanks for simple solution. If iSync says it cant link then accept dialup link on your phone

Matias Bruhn @ 14.06.2007 06:31 CEST
Forgot to pair it first d'oh... So messed round with it quite a while - REMEMBER TO PAIR FIRST ;0) Thanks Koos!!!!

The Prof @ 14.06.2007 14:08 CEST
Its people like you that make the internet so great.
Worked first time!!!

chris @ 14.06.2007 22:29 CEST
Amazing! Even a fool like me got my favourite photos and tunes on my new 6300.. Thank you for sharing.

Pao Pao @ 15.06.2007 15:43 CEST
Hello! Just bought my new 6300. It never worked for me. I just copied your Metaclass.plist to my folder, saved, closed, then ran iSync. But, it keeps telling me no devices scanned. Did I do something wrong. Help please! Thanks :)

David Mulholland @ 16.06.2007 02:56 CEST
Thanks so much for posting this - until I found your article I thought I'd have to pay for a 3rd party app. Worked perfectly for me.

Magic Plums @ 16.06.2007 18:28 CEST
Brilliant! Thanks. At first I didn't think my folder structure was right but I scrolled down passed the Nokia folders etc and found the folder phoneModelsSync.phoneplugin

Koos @ 16.06.2007 18:40 CEST
@Pao Pao,

Try to remove the iSync preference files,
and retry.

You also need a bluetooth partnership, maybe you didn't made that..

Jonas Lood @ 23.06.2007 04:51 CEST
Hi Koos,
I just bought a Nokia 6275 and tried you method for updating the classes list. It did now work. Do you have any ideas if anything else needs to be done. The phone discovers the bluetooth connection.

Thank you.
Jonas

Koos @ 23.06.2007 10:14 CEST
@Jonas Lood,

If the phone's software or hardware is different than the 6300 or 6280, this trick is not going to work with your phone. Your phone is also a brand new model, maybe you should wait a couple weeks and try to search the internet again.

Meng @ 24.06.2007 08:14 CEST
Unbelievable. With Many thanks!. I did not have to buy any other piece of software. It sync-ed my 6300 and Address Book perfectly. I copied your whole Metaclasses file lock, stock and barrel instead of modifying mine. Brilliant - thanks heaps!

jd @ 26.06.2007 00:50 CEST
Great post, man! Work around works perfectly for me.

bimms @ 27.06.2007 07:12 CEST
Hey Koos, What a great fix. Thanks heaps for your generosity ...works well and saved me time & $

elMatador @ 01.07.2007 02:05 CEST
Thanx for the nice workaround ;)

There is still a problem of syncing birthdays with iCal. Has anybody a solution here?

I nearly forget every birthday...

Greets, elMatador

coxy02 @ 01.07.2007 04:38 CEST
looks like this is going to work, except i can't save the icon..can you send it to me (email)? (it's saying i need to buy quicktime pro.)

Jonathon @ 04.07.2007 15:33 CEST
Great stuff mate! I am just a novice, but managed to follow your instructions, and lo and behold - it works!! Thanks again

Martin @ 05.07.2007 14:19 CEST
Hy..

thanks for the great hack...

worked 100% !!!

Thanks.....

Martin

Tobias @ 05.07.2007 18:03 CEST
Thank you. This hack worked perfectly since first sync. Amazing.

Harald @ 05.07.2007 20:51 CEST
Many thanks! It worked like a charm. Vielen Dank und liebe Grüsse aus Wien.

Harald

Koos @ 06.07.2007 11:38 CEST
Thank you ! :)

Christopher @ 07.07.2007 13:27 CEST
Hi Koos,

I think I altered and completely messed up my Metaclasses.plist. The link above to your entire plist does not work, nothing comes up.

Could you send me your entire metaclasses.plist that INCLUDES the 6300 XML. This is just not working for me.

Really appreciate your help.

Koos @ 07.07.2007 13:52 CEST
The link just works fine here -> Metaclasses.plist.

If you're using Safari, you maybe missed the Downloads dialog.. It must be downloaded somewhere..

Alan Seah @ 10.07.2007 10:52 CEST
Thank you so much. Not only is my phone synching with my Mac but as someone who is not technically inclined at all -- I'm incredibly proud of myself for doing this without having to call anyone else for help. Which also is a way of saying your instructions were most concise!

James Chew @ 10.07.2007 18:46 CEST
Hey Koos, thanks alot man!
So happy to be able to use my new 6300 with my Mac Book Pro. Thanks! - Singapore

jens @ 11.07.2007 10:19 CEST
There is no better way to do this! Just perfect!

Thank you so much....

Brad @ 11.07.2007 12:49 CEST
thank you so very much. im a dud, and this works seamlessly!

serge Born @ 12.07.2007 00:41 CEST
you saved my day! thanks a million!!

Brad @ 12.07.2007 06:22 CEST
i was able to set up my own 6300 to my macbook last night effortlessly. however, setting up my wife's 6300 with my our powerbook g4 running mac os x 10.3.9 is proving to be more difficult. following your tips, i click on isync, then show package contents, then contents.... there is no plugins icon after that>>>> i can no longer follow your tips. please help?

Koos @ 12.07.2007 13:07 CEST
@Brad,
I have no experience with Panther, so I can't help you with that..

Emar @ 16.07.2007 15:52 CEST
Woks great. You saved my day.Tahnks a lot!

Jess @ 17.07.2007 18:16 CEST
First it seemed to work, but now iSync doesn´t find the 6300. also deleted the sync history, which didn´t help. I´m working with OSX 10.4.5 and iSync 2.1.1 (89.0), in german – any hints?

Koos @ 17.07.2007 19:28 CEST
Do you sync with an USB cable, or do you use Bluetooth ?

Jess @ 17.07.2007 19:36 CEST
I use Bluetooth…

Koos @ 17.07.2007 19:39 CEST
I suggest to re-apply the steps in the tutorial. The application has probably overwritten the MetaClasses file, which contains the Nokia 6300 entry.

Jess @ 17.07.2007 19:52 CEST
I already did that, I tried it many times. Is it possible to get the whole folder?

Are there any prefs in the 6300 I have to set?

Thank you!

Koos @ 18.07.2007 16:07 CEST
I don't think you have to find the solution on the phone's side. But I think I know what you're doing wrong / what you've forgotten. I think the partnership between your mac and your phone is broken. Try to add your Nokia 6300 again in the bluetooth devices list, and the problem must be solved.

Thomas Edwardson @ 20.07.2007 21:47 CEST
Found a freely available plugin that makes it even more easy to make the Nokia 6300 supported in iSync.

http://klauskjeldsen.dk/2007/06/08/free-nokia-6300-isync-plugin/

Koos @ 21.07.2007 14:10 CEST
@Thomas
Thanks!
That's much easier in stead of my tutorial.
I'll make a link to that article in this blog entry soon..

Gustavo Vera @ 22.07.2007 02:24 CEST
Koos,
By their comments the method works fine but not for me that I have a Nokia 6275.

I tried all yours tips without success. A Nokia Dev page (http://www.forum.nokia.com/devices/6275) said that 6275 has the same family as 6300. In fact ISync find it but said: "This device is not supported by ISync"

Any other clue on this. Totally appreciated.

Gustavo Vera from Venezuela ....

Krest @ 25.07.2007 10:55 CEST
Worked great, thanks a lot

http://www.kressline.de/files/isync.html

Lloyd H. VIllanueva @ 26.07.2007 07:18 CEST
I had a problem with my Nokia 6300 phone. Every time I browse the Opera Mini (3rd party software) I got prompted with "subscribe to packet data first". I set all the configuration but still won't able to access it. Please advice or recommend solution. thanks.. :)

sambw @ 27.07.2007 12:27 CEST
thanks - worked perfectly for iCal sync!
My contacts aren't syncing from phone to mac though - any reason why that might happen?

Koos @ 27.07.2007 13:40 CEST
@sambw
Didn't you forgot to select the checkbox for syncing contacts in iSync ?

zuns @ 04.08.2007 08:42 CEST
Great help although I could not get the photo tiff to copy from quicktime, i just changed the name of the 6280 to 6300 worked picture is different but I know the difference. Thanks heaps, PS I had no idea what I was doing but your directions were great.

Katja @ 05.08.2007 16:49 CEST
Thanks! works perfectly!

Dominic @ 07.08.2007 23:04 CEST
You Hero!

Jen @ 15.08.2007 20:11 CEST
hello!
thanx very much for the great directions! isync knows my phone now, but there is a problem i don't know, i do not sync my phone, there "an unexpected error occured. Device "phone" synchronization failed" hope you can help me.
Jen

Koos @ 15.08.2007 20:16 CEST
@Jen,

Click 'Reset Sync History' in iSync pref, and try again.

Tina @ 16.08.2007 21:50 CEST
Wow! I'm so happy. My new 6300 runs with your isync help. It's so easy. And i'm not a computer junkie, only a girl ;o)

Thanks a lot for your help!
All the best, Tina

Koos @ 16.08.2007 22:24 CEST
Your welcome, Tina !

Jung @ 17.08.2007 08:50 CEST
i can´t find the file MetaClasses.plist. Who can help?

Miguel @ 18.08.2007 12:54 CEST
Muchas gracias. Ahora estamos muy contento aqui en España.

Rums @ 20.08.2007 02:06 CEST
Sorry to hijack your thread here Koos, but for those of you looking to get your contact photos and birthdays syncing as well, please read my post here:

http://www.dabgotra.com/?p=46

Koos @ 20.08.2007 10:58 CEST
@Rums,

Awesome!
You didn't hijack anything, thanks a lot for this information and guide!

I will make a link to it in my blog post.

richard hanmer @ 20.08.2007 18:46 CEST
IT WORKS GREAT. iSync is the easiest sync tool around and this hack helps keep that way. The ONLY thing that I was surpised by was that it doesn't sync the photo for your contact. My other phone is a Sony Ericsson P900 - a symbian phone and have used iSync with. It displays the photos for my contacts but Nokia 6300 doesn't. Is this an OS thing?

Koos @ 20.08.2007 19:08 CEST
@Richard Hammer,

Read the last line of the blog post.
There you'll find a link to a fix for your problem.

Rums @ 20.08.2007 19:25 CEST
Glad it works for you, Koos! I'm pretty pleased that we were able to make it past this hump. Now, for me to start working on auto-syncing when I get in range of my laptop... :-)

Madeeha @ 21.08.2007 04:58 CEST
Awesome article! Thanks so much. I didn't think it was possible and I was about to give up my Nokia and get a smartphone! Thank you!

Jörg @ 21.08.2007 13:04 CEST
Vielen Dank, das ist wirklich großartig!

ram89 @ 01.09.2007 07:11 CEST
did some body have find how to put his nokia 6275 on iSync

Cuetzpall @ 01.09.2007 18:00 CEST
I have a nokia 6275i, some ideas to change the metaclasses file?
need help please!!!!! i can´t find the code....

Alex @ 04.09.2007 01:46 CEST
Thank you so much

Ken Ledger @ 08.09.2007 23:43 CEST
I have can get the 6275i to be recognized by iSync with the following changes to the Identification.

Identification
<dict>
com.apple.cgmi+cgmm
<string>Nokia Mobile Phones+Nokia 6275i</string>
com.apple.gmi+gmm
<string>Nokia Mobile Phones+Nokia 6275i</string>
com.apple.usb.vendorid-modelid
<string>0x0421/0x04F9</string>
</dict>

But I have had no success getting the phone to sync yet. Anyone know the rest?

Ken @ 08.09.2007 23:50 CEST
Sorry previous post was not clear.

Basically I changed the string 'Nokia+Nokia 6300' to 'Nokia Mobile Phones+Nokia 6275i' for the com.apple.cgmi+cgmm and the com.apple.gmi+gmm keys.

This allow iSync to add the phone but the sync errors out.

Maki @ 16.09.2007 23:50 CEST
For all of you who are having issues with Calendar event hours sync'd incorrectly from iCal -> 6300, I think this can be corrected by modifying the following setting to a value of false:
hasTimeZone
<false/>

Inside the following file:
PhonePlugins/Nokia6300.phoneplugin/Contents/Resources/MetaClasses.plist

If the setting has the value of true, then my iCal events appear with a GMT time difference on my handset when the event was created in iCal (it appears fine when created on the handset). You can avoid this by either changing your events as belonging to a "floating" time zone in iCal (enable Time zone support first in Advanced prefs).. or by modifying this setting. I wish I discovered this difference in the MetaClasses file first, would have saved me changing all my events to floating!

Maki

Koos @ 17.09.2007 11:14 CEST
Nice find Maki !
Thanks.

CyVice @ 17.09.2007 21:06 CEST
Thank you for this great job !
It worked perfectly and immediately for me !

Andy @ 19.09.2007 20:31 CEST
Thankyou so much - awesome.

Jonny Mingham @ 21.09.2007 02:57 CEST
can someone give me the idiots guide to sort the packet data so i can access the internet on my phone cos that up there has cunfused me
thank you

Henrik @ 21.09.2007 09:59 CEST
Hi just updated the phoneplugin but still can’t get the phone to synchronize the mobile contacts with the adress book.
Well it does synchronize but the phone contacts is beeing synchronized into the group “ALL” but I made a separate group just for the phone but it will not synchronize into this group?
Any idea?
I am running OS X 10.4.10, isync 2.4 and adress book 4.0.5.

Colin Myles @ 23.09.2007 11:42 CEST
Thankyou, worked perfectly, most excellent.

Jan Gunnar Hoff @ 26.09.2007 23:00 CEST
What a great piece of advice! Neither Apple nor Nokia has information about how to configure this. Thank you so much!

Reinhold Degenfellner @ 30.09.2007 21:51 CEST
worked perfectly, thanks for this article

Paula Rimmer @ 02.10.2007 19:14 CEST
IT WORKED!!! Thankyou so much - I've fiddled & diddled since May with trying to find a plug in that would work - excellent!

Adam Massey @ 03.10.2007 17:29 CEST
Couldn't get it to work with my phone. I have a message after add device which says isync cannot connect to this device. Any thoughts?

trackvasile @ 05.10.2007 22:45 CEST
i need the iSync program kit

raoul @ 06.10.2007 18:22 CEST
Wow it works hihi - Thank you!!

Andrew @ 14.10.2007 19:25 CEST
Took me a little longer than most... but I am not the sharpest knife in the drawer either.

Thanks SO much for this.... Nokia should give you a free phone and a million dollars.

Richard @ 18.10.2007 10:31 CEST
Got the phone today and now all set up with your help. - Fantastic - made my day. all worked fine all though I could not save the picture for some strange reason.

Gordon @ 29.10.2007 20:40 CEST
Thank you! I was just looking for a iSync compatible phone & you save me some $$

chris @ 30.10.2007 16:35 CEST
Thanks a lot for your help. Worked a treat. Used the plug in on the link it was great.

Chris @ 31.10.2007 02:27 CEST
It also works with the new iSync 3.0 in OS 10.5. But it became some more difficult:
1. Go to iSync/contents/plugins/applephoneconduit.syncdevice/contents/plugins/. Then duplicate for example the "nokia-7370.phoneplugin" folder. Rename it as "nokia-6300.phoneplugin"
2. Go to …/nokia-6300.phoneplugin/contents and open the info.plist file with TextEdit. Press Apple-Key and F and replace every 7370 with 6300. Save the file!
3. Do the same thing with the …/nokia-6300.phoneplugin/contents/resources/metaclasses.plist file.
4. Replace the "com.nokia.7370.tiff" file in the same folder by the icon from above. Don't forget to rename it as "com.nokia.6300.tiff" - Done
I've already tested it and it works perfectly! Have fun!

feyzal @ 06.11.2007 14:52 CEST
hey man great.. works perfect..

Alexander @ 11.11.2007 09:57 CEST
Got a 6120classic with the same series 40 3rd eition as the 6300.
How do you get the Hex ID of a model ? Would like to "customize" your plist by exchanging all >6300< entries by this model. Guess I have to modify also the modelid which for the 6300 is 0x04F9..... Where is this Info readable ?

Chris @ 11.11.2007 16:19 CEST
Well, I have not customized any modelid. If your mobile is running the series 40 3rd edition, I guess you will not have any trouble. You can read this info exclusively here, since I figured it out on my own,

Matt @ 12.11.2007 13:41 CEST
Mhh pretty strange the calendar syncing is not working very well on my Mac with Leopard and Nokia 6300. Only one old calendar which is not rally part of iCal will be synced. Does anybody have an idea?

Thx, Matt

jp @ 13.11.2007 00:23 CEST
My problem still persists... I've tried both the plugin and the iSync hack suggested by Chris (worked well, but...)

When I start iSync and try to add the device, it finds 6300 and opens the connection to phone (and closes it after about 20 seconds).

I double-click the logo in iSync to add the device, but then it says no device found.

Anyway the Nokia 6300 now shows in iSync, but it doesn't do anything to sync it. iSync seems to be somewhat jammed, when it opens it just says "refreshing contact groups information" and doesn't get anywhere from there.

I'm running Powerbook G4 with Leopard and Nokia 6300 with firmware 5.00.

Thanks for your comments!

erich @ 13.11.2007 10:06 CEST
Great, 1000 thanks.works perfect.

Platonismo @ 20.11.2007 10:04 CEST
Thanks a lot! Great work!

Alex @ 21.11.2007 00:39 CEST
You saved my day. Working with Leopard as well.
Great Stuff!

Platonismo @ 30.11.2007 20:09 CEST
Thanks again, I upgraded to Leopard and after I repeated your changes it works again!

SteveH @ 05.12.2007 00:22 CEST
Hey many thanks. Works perfectly!

MK71 @ 06.12.2007 13:01 CEST
Thanks, works great. I have only one (two) problems. The time problem with hole day meetings (13:00-13:00) and that only the the workadress is syncronised if an adressbookentry has more than one adress (private, work, ...)

thx

superM @ 06.12.2007 21:47 CEST
WOW! My first hack ever and even legal. MANY THANKS. it works perfect.

but as you have written, there is a bug with syncronizing birthdays. your link is unfortunately not valid anymore at dabgotra.com

Garth Alley @ 08.12.2007 07:28 CEST
Thank you soooo much!

SergejS @ 14.12.2007 00:59 CEST
Thanks, thanks, thanks, it works perfectly!

Frank van den Berg @ 28.12.2007 18:17 CEST
Super Koos!
Alleen het plaatje heeft onderkast letters tov de definitie in de xml

Veronica Gonzalez @ 01.01.2008 13:54 CEST
Thank you for the instructions, and although i have no i.t. background, i was able to make it work perfectly. Just followed your instructions and voila, my isync works perfectly well with my phone. Thanks again!

sanjay @ 02.01.2008 09:22 CEST
what is the suscribe packet data first

Jmo @ 04.01.2008 18:14 CEST
Dude, you rock! Really well explained and so easy to use! Thank you!

Jochen @ 05.01.2008 22:11 CEST
Thanks a lot! Works perfectly!

Mohammad ALBAHAR @ 15.01.2008 16:01 CEST
Guys , you use the same concept fro nokia 6500c, it worked fine 4 me

Bruno Moriggl @ 01.02.2008 00:25 CEST
THANKS!!!!!!!!!!!!!!!!!!!!!!!!!
You are the GREATEST!!!!!!!!!!!!

Greetings from Innsbruck Tyrol Austria

Bruno

Toho @ 02.02.2008 17:16 CEST
Hey, you are great. Now my Nokia is working now. Just amazing...Thank you a lot. And go ahead working out so useful things. from Germany

azeem @ 13.02.2008 14:03 CEST
Nothing

samba @ 14.02.2008 12:47 CEST
Thank you. I've justed upgrated my mac to leopard and i was affraid about loosing my contacts. Everything went allright.

Chris Gibson @ 14.02.2008 16:15 CEST
This just refuses to work for me -- I'm sure the plugin is fine, but I think that the combination of Leopard and a USB connection has proved too much. Ironically, I only need to sync my 6300 because I'm swapping the crappy, outdated piece of sh*t for an iPhone. No OSX synchronisation in 2008? Bye bye, Nokia.

Adrian Hoe @ 20.02.2008 06:26 CEST
Hi,

Thanks for your 6300 iSync hacks. It has helped me to decide on Nokia 6300 and I bought a new 6300 two days ago.

I wrote about it in my blog.

6300 is a great phone besides being nice.

Tri @ 21.02.2008 20:23 CEST
Thanks! Works excellent..!

Sabine @ 25.02.2008 13:51 CEST
Thank you so much for your help. It works perfectly.

SL @ 26.02.2008 18:32 CEST
Works perfectly..thanks a mil

flick @ 28.02.2008 02:22 CEST
hmmm - this makes no difference to me - the device doesn't show up at all. It's in "about this mac" and I can use the card as a folder in the finder... when attached to the phone in usb. But when I add device it says no device found. AND I have no idea where you are seeing these icons show up; there are few options anywhere that seem to relate to choosing a phone model or telling isynch what to look for. It's just add device --> no device found. The end.

flick @ 28.02.2008 02:26 CEST
i should add I also have 6275i.

Nando @ 01.03.2008 01:58 CEST
Thanks man!!! SUper idea to put your own list here!!

Mark @ 04.03.2008 16:22 CEST
Thanks! I was nearly thinking about getting an iPhone and changing my contract!

Koos @ 04.03.2008 17:35 CEST
Well I don't want you to refuse buying an iPhone :P,
The iPhone is a great device, it replaced my 6300.

beezy @ 06.03.2008 01:38 CEST
thank u very much, works perfectly!

Marcus @ 10.03.2008 01:59 CEST
perfect - can not thank you enough!

Doris @ 19.03.2008 14:56 CEST
Jawohl!!! your instruction is so easy, it's running as well for idiots like me, as for profs! Merci vielmal!!

Nuh @ 08.04.2008 09:40 CEST
Thanx!

Daniel @ 14.04.2008 15:43 CEST
Wonderful! Even I could enable syncing in less than a minute.
Thank you very much!

Christoph @ 15.04.2008 21:58 CEST
Thanks a Lot

John @ 22.04.2008 14:47 CEST
Hi Koos,

I checked out the link you provide for getting birthdays to work on dabgortra.com. These infos didn't help me at all, and the iphone plugin provided on that page doesn't seem to work with isync version 3 and leopard.

But I did get the birthdays to work now!
The following page is in german, but you should find your way around:
http://www.macuser.de/forum/showthread.php?t=256320

go to the post from "idrops" on April 7 and add the birthday string as indicated after "SyncEngine-series40.plist".

This must be done in the following file:
Applications/iSync.app/Contents/PlugIns/PhoneFamilySync.phoneplugin/Contents/Resources/PhoneConduitv2-series40.plist

It now syncs birthdays from Address Book to nokia 6300 and vice versa. (i.e. the birthday entry for an individual contact on the nokia is synched, and it appears in it's calendar).

Hope someone can use this... the pictures would be nice too, but that isn't as important to me..

John @ 22.04.2008 14:53 CEST
oops, that was a mistake... I posted the wrong filename!

the correct file is :
SyncEngine-series40.plist
NOT the phoneconduitv2-series-40 one.

sittie @ 24.04.2008 10:27 CEST
i got a problem my phone n6300 my gprs not appear my phone even i set it as always online and i allready activate my GPRS and MMS what should i do for this problem... need help i cant sent MMS even browse,,, my network user is smart,,

Philip Gruetter @ 24.04.2008 15:59 CEST
Thanks a lot. like al the others, it works just fine!

Markus Kühne @ 04.05.2008 11:48 CEST
My Nokia 6300 is overflowing with textmessages (SMS) and I desperately need to save them on my MacBook.
For reasons far, very far, beyond my means of understanding (and I can understand a lot of bullshit) Nokia seems to be unwilling to support this need.
Could you show me a way to downlowd MY smses from MY handy onto MY MacBook?
My 6300 is by now running into severe troubles (frequent resets and all sorts of disturbing behaviours like getting stuck during calls etc) because of the overflow of smses.
Thank you for your help!
Sincerely
Markus Kühne
P. S. I´ve voiced this request in the Nocia Club a long time ago and wasn´t even graced with an answer! Nokia doesn´t like having customers, does it?

John @ 05.05.2008 12:33 CEST
markus, this freeware app works wonders:

http://www.macmedia.sk/download.htm

mat @ 09.05.2008 15:18 CEST
Yes!!!!!!!!! Works perfekt!!!!!!

thanks a thousand times!!!!!!

Dennis @ 13.05.2008 12:03 CEST
Thank you for this great solution. My problem is, that by have downloaded 90% to Mac from the NOK6300 the device is automaticly shut down, complete switched off and the transfer stops. Any ideas? Thank you!

matze_richter@leb.de @ 22.05.2008 23:08 CEST
Great! Works great!

Me @ 09.06.2008 21:15 CEST
Nice Nice - thank you

merkwuerden @ 26.06.2008 19:50 CEST
I like it. Bought the phone today. Downloaded the modified files. Works like a charm. Looking forward to future pieces of advice!

Cheers Alex

David Thompson @ 28.06.2008 19:40 CEST
Love your solution, will it work with a Nokia 6301. Any advice much appreciated.

rizwan @ 04.07.2008 16:34 CEST
hi rizwan

i want to download free version of 6300 v04.20

Dave @ 24.07.2008 02:13 CEST
Thanks much. See this page for the new locations of files; http://klauskjeldsen.dk/2007/04/20/how-to-isync-a-nokia-6300-on-mac-os-x/

tim @ 06.08.2008 22:14 CEST
Works fine with 6301 as well!!!!! Just substitute all instances of 6300 in Koos' file for 6301, relabel his NOK6300.tif file as NOK6301.tif reboot isync and Bob is your uncle....

All hail King Koos!! :O)

Eva french @ 08.08.2008 01:13 CEST
YOU ARE.......... thanks from Barcelona. looked for this one since 6 hours now. xx

tom @ 08.08.2008 01:47 CEST
hi all,
i can't syncronize my 6300 with my macbookpro!! i did everything you said correctly but nothing!! i don't know how backup my contacts. someone could help me please? when i open isync he see my 6300 but when i start syncronization he tells me that doesn't find nokia 6300!!! how is it possible??

oliver @ 13.08.2008 12:20 CEST
works the same way with the nokia 6300i! thx, great

Torsten @ 17.08.2008 18:07 CEST
SUUUUPER - the 6300 works with my mac - many thanks!!

Stephen @ 19.08.2008 00:52 CEST
So I followed all the directions, changed the code for a 6301, changed the code for USB connection, but iSync still can't find the phone. Any ideas? I saw you told someone to delete the iSync preferences file. But I'm not sure how to do that/where it is.

Any help would be much appreciated.

iDin @ 20.08.2008 01:10 CEST
Thank you so much you are like a Hero. The best Hack i have ever seen before... Thank you again.

Tobias @ 27.08.2008 21:19 CEST
Thanx very much buddy - works out just fine!

Nico Ammann @ 28.08.2008 14:52 CEST
Thank you so much. That's very cool of you!

Daro @ 29.08.2008 21:35 CEST
Hi Koos,

I have a Nokia 6276, which is the same as 6270 and 6275 in terms of OS.
I followed every step and it didn't work.
I erased the isync preference file and still doesn't work.

I copied your MetaClasses.plist file into the same directory the old one was in.

Nothing seems to work :(

Can I get a little more help here?

Daro @ 29.08.2008 21:42 CEST
BTW, I'm running Leopard

jj @ 07.09.2008 01:13 CEST
awesome, thanks! :)

Gav C @ 08.09.2008 10:46 CEST
Sorry to hijack with a link to another page

I'm using Leopard and a 6300, I copied this plugin

http://nokia6300.net/6/nokia-6300-isync-plugin
(after extracting it) to

/Applications/iSync.app/Contents/Plugins/ApplePhoneConduit.syncdevice/Contents

started up iSync - all good!

shabba @ 12.09.2008 20:38 CEST
I have a nokia 6300i, basically the same model. So I tried your crack and it works perfectly. thanks mate, cheers!

Eros Suà @ 17.09.2008 02:01 CEST
God bless you...perfecto!!!

Ciao

Mariana Paez @ 17.09.2008 21:47 CEST
It works perfectly! Thanks a lot!

mohamed @ 28.09.2008 22:49 CEST
salam salu byan nakia 6300

claus @ 30.09.2008 08:29 CEST
thanks a lot. great solution!

Rob @ 06.10.2008 18:17 CEST
You saved my day! Worked perfectly! Thanks a lot! :-)

Matt @ 20.10.2008 16:51 CEST
i've got a new macbook pro, so am on mac os x 10.5.5 (i think it's leopard) and i've put your MettaClasses file and the icon in the folder, but when i go to add device, it finds my phone, but says, "iSync cannot connect to this device", what do i need to do?

memuna @ 26.10.2008 13:24 CEST
my internet is not workling it tells me to suscribe topacket data i did and there no use what should i do about it?

FC @ 27.10.2008 02:36 CEST
Am in the same situation with my 6276 as Daro. Since I did not know what the OS version is, i tried ALL of the Nokia entries in the MetaClasses.plist file. Didn't delete the prefs file between each attempt, though.

Any comment, Koos or Daro?

gralliawn @ 01.11.2008 21:24 CEST
http://www.cnews.ru/cgi-bin/redirect_cnews.cgi?//doroven.org/item.php?id=3187 Buy Accutane
Accutane is a form of vitamin A. It reduces the amount of oil released by oil glands in your skin, and helps your skin renew itself more quickly.
http://www.cnews.ru/cgi-bin/redirect_cnews.cgi?//doroven.org/item.php?id=3187 accutane online cheaper[/url]
http://www.cnews.ru/cgi-bin/redirect_cnews.cgi?//doroven.org/item.php?id=3187 accutane online cheaper[/url]
http://www.cnews.ru/cgi-bin/redirect_cnews.cgi?//doroven.org/item.php?id=3187 when to use accutane[/url]

Joey @ 07.11.2008 13:40 CEST
Great! It works perfectly - thanks a lot!!

Anna @ 11.11.2008 00:34 CEST
Hey! Very cool description. I did all perfectly right and everything's working!
I liiiike :-)
...and 4 free!
Sweet!

Thanks a lot!!

kirsty elliott @ 11.11.2008 00:37 CEST
you are a genius!

Anna @ 12.11.2008 01:11 CEST
No. I just performed a perfect copy n paste work. One of the standards u learn @ school ;-)
the genius r u!!
mayb I should quit law n bcome a genius as well! ha ha!

enjoy yourself :-)

martin @ 06.12.2008 01:44 CEST
thanks - worked immediately !

lili @ 27.12.2008 12:47 CEST
thanks! it works perfectly and is easy enough to install - even for unexperienced users.

Laura Wenz @ 27.12.2008 20:28 CEST
Thanks a lot! Works perfect even with iSync 2.4
Well done! Greetings from Germany!

Martin @ 29.12.2008 19:34 CEST
this plugin works perfect. now it is time for a 6300i plugin.

boka choda @ 02.01.2009 07:48 CEST
this is very bal website peoples you are not sing in

Ash @ 17.01.2009 06:12 CEST
Thank you this worked perfectly, I'm so happy!

Karen @ 19.01.2009 00:24 CEST
Thank you! Saved me so much time.

Herman Slaats @ 20.01.2009 22:45 CEST
Hi Koos,

Are you willing to make a plug-in for the 6300i ?

Thanks,
Herman

Herman Slaats @ 20.01.2009 22:47 CEST
Sorry, thought is replied to something else...
You think your guidelines will work for the 6300i as well?

hans-peter @ 31.01.2009 19:30 CEST
Thanks, worked perfectly. Greetings from Germany!
Vielen Dank, hat perfekt funktioniert. Gruss H-P

anne @ 01.02.2009 16:43 CEST
thank you very much! your description is easy to follow, it all worked very well. feels like being my own admin!

Rea @ 04.02.2009 14:03 CEST
Wow, perfect!
How do you know all these programing stuff?

Rea

S @ 06.02.2009 01:10 CEST
Works perfectly! Thank you!!! You made my day :)

adeoye @ 07.02.2009 18:21 CEST
pls my phone say "only 70 sets allowed" everytime i try to save an internet config, the it discrads d settings

adeoye @ 07.02.2009 18:26 CEST
pls my phone say "only 70 sets allowed" everytime i try to save an internet config, the it discrads d settings

Werner M. from Vienna, Austria @ 15.02.2009 23:06 CEST
Thank you!!

Erwin @ 20.02.2009 20:30 CEST
Thank you very much.

But unfortunately it doesn't work. I tried both - to edit the metaclass file or to replace it. both don't work... :-(

I have OSX, 10.5.6. The bloetooth connection is ok, i can send files in both ways.

can someone help me?

ton @ 25.02.2009 12:23 CEST
Have the same problems as Erwin.
Tried via USB and Bluetooth but get the following message.

“Device is not available or synchronization was cancelled. Close dialogs and applications on the phone and try again. Device synchronization failed.”

RogS @ 03.03.2009 00:41 CEST
I'm having problems getting it to recognise my 6300 as well. Have tried koos's metafile and also the link suggested from nokia6300.net and neither work. I'm on Leopard 10.5.6 and would welcome any sugestions. Thanks

Arpit @ 17.03.2009 20:01 CEST
amazing... just folowed the process as told and wooww i was really surprised it worked just fine..

THANX A BILLION MAN

shame on nokia though

René @ 25.03.2009 16:48 CEST
On my MacbookI do not see the model you mentioned.

I only see the following

6102
6103
6126
6131
6133
7270
7380

Thanks,
René

Stan @ 30.03.2009 21:46 CEST
I try to do everything as you advice including all comments you put later on and it does not work
don't have any clue why.
May be i am just unlucky

Jong @ 02.04.2009 20:38 CEST
With the old firmware on the nokia (5.x) I had no problems, but after the update to 7.21 the bluetooth connection fails. Is there a solution for this problem?

Stefan Braun @ 04.04.2009 14:56 CEST
Thanks! Works fine with my iMac
Stefan

eddy @ 05.05.2009 11:13 CEST
very nice. it works. thanx heaps.

Matthew @ 15.05.2009 04:21 CEST
Just trying to follow Maki's comment regarding changing the 'hasTimeZone' setting to <false/> however can't find the MetaClasses.plist file that it resides in. Anyone able to tell me where to look? I know that the path is listed in Maki's post (PhonePlugins/Nokia6300.phoneplugin/Contents/Resources/MetaClasses.plist) however I can't find the start folder (ie PhonePlugins).

Any help much appreicated - all is otherwise well with my Nokia6300 and OS X 10.5.

Thanks,

Matthew,
Auckland, New Zealand

Matthew @ 15.05.2009 14:01 CEST
Hi again

An update:

Have found a MetaClasses.plist file - that being the one listed when you navigate according to Koos original instruction (ie Quit iSync if its running. Right-click on the iSync application in your /Applications folder, and select “Show Package Contents”. Navigate through the folders to Contents -> PlugIns -> ApplePhoneConduit.syncdevice -> Contents -> PlugIns -> PhoneModelsSync.phoneplugin -> Contents -> Resources)

However that .plist file doesn't seem to be the correct one - it's certainly not in the correct folder as descried by Maki. I've searched that .plist file and can't find any reference to 'hasTimeZone' - so assume it must be the wrong .plist file I'm attempting to modify.

I'm running iSync 3.0.2 with 10.5.6.

Matthew

bratislaw @ 26.05.2009 20:44 CEST
many thanks, worked great.

Jacky @ 03.06.2009 19:10 CEST
You are great
Thanx

Pavluschka @ 24.06.2009 00:22 CEST
Hey your manual is very good, it works by me.

BUT I have another problem when I sync it stops by 32-nd of 182 files

always 32 files are "downloadet" an then restart my phone.

Do you know what the problem here is?
And how can I correct it?

Thanks

PS: I tryed it with Nokia-PC-Sync with USB-Wire, with Bluetooth

jaime @ 25.06.2009 06:30 CEST
It works...:)

luke j @ 25.06.2009 21:53 CEST
amazing cheers

Peacetulip @ 30.06.2009 11:03 CEST
Great description! Works within a sec! Thanks!!

Hens Gunneman @ 02.07.2009 17:44 CEST
You rule thanks for the metafile

Schnubbi @ 06.07.2009 08:53 CEST
Thank you! Works flawlessly!

Thomas @ 13.07.2009 11:41 CEST
perfect, just worked out like u said!
good explenation!
Thx

steffi @ 24.07.2009 16:52 CEST
works perfectly! big thx from switzerland

Thomas @ 04.08.2009 10:39 CEST
super hat funtioniert

Bob T @ 08.08.2009 00:51 CEST
Many thanks - worked perfectly!

Aaron @ 29.08.2009 18:45 CEST
Over 2 years later, I'm inexperienced and this worked like a charm. Great public service. Thank you so much.

puqdox @ 01.09.2009 21:34 CEST
Umm, not working for me (OS X 10.6 Snow Leopard). iSync is crashing after adding the 6300 (recognizes it correctly).

I got this crash report:

Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008
Crashed Thread: 0 Dispatch queue: com.apple.main-thread

Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 com.apple.JavaScriptCore 0x00007fff85eb3580 JSC::JSValue::get(JSC::ExecState*, JSC::Identifier const&, JSC::PropertySlot&) const + 64
1 com.apple.JavaScriptCore 0x00007fff85fa0372 cti_op_get_by_val + 1538
2 ??? 0x0000278e20802093 0 + 43491384107155
3 com.apple.JavaScriptCore 0x00007fff85f89cf6 JSC::Interpreter::execute(JSC::FunctionBodyNode*, JSC::ExecState*, JSC::JSFunction*, JSC::JSObject*, JSC::ArgList const&, JSC::ScopeChainNode*, JSC::JSValue*) + 630
4 ??? 000000000000000000 0 + 0
5 ??? 0x0000000113befc00 0 + 4626250752
6 com.apple.JavaScriptCore 0x00007fff85f7b580 JSC::JSGlobalObject::~JSGlobalObject() + 0
7 ??? 0x0000441f0f660000 0 + 74900193017856

vex @ 08.09.2009 19:38 CEST
It's not working for me either. Snow Leopard's iSync crashes after adding the Nokia 6300. Hope someone can help.

MarcelNBG @ 22.09.2009 15:27 CEST
Would something similar work for the Nokia 6700? It is also on Series 40...

NokiaMaster @ 25.09.2009 13:36 CEST
It works with Snow Leopard, too!!!!! I did it

You just have to change the old given code for 6300 (by Koos) a little bit.

Before you can do this you have to change your access rights, first of the folder "recources", then of "metaclasses.plist" to be able to save your changes.
Change this for Nokia 6300 Part
<string>0x0421/0x04F9</string> (old)
<string>0x0421/0x045A</string>(now)

Then it should work

Anna Özkaragil @ 27.09.2009 09:25 CEST
Hey! Your plist worked perfectly on my 6300. Can I do the same thing with my old 6310i?

Julia @ 30.09.2009 22:51 CEST
wow, thanks a lot!

Mihail Mihaylov @ 05.10.2009 10:51 CEST
It works perfectly with Show Leopard. One should only do the change, which NokiaMaster proposed.

Thanks NokiaMaster.

Grion @ 06.10.2009 00:22 CEST
Super - Danke!

Charlie @ 06.10.2009 12:15 CEST
I am running snow leopard 10.6.1 and have made the changes (the string was already showing 0x045A). The 6300 shows up under add devices in isync but it then crashes. Anyone know how to fix this? Thanks

Jeff @ 07.10.2009 23:11 CEST
I am in exactly the same situation as Charlie with Snow Leopard; iSync crashes even after having made the change from NokiaMaster. Any suggestions on how to fix this? I am using a 6301 rather than a 6300; not sure if that matters. (And I have changed all the "6300's" in the code to "6301", so that is not the issue.)

rogermellie @ 09.10.2009 11:18 CEST
@Charlie

I'm new Mac user running Snow Leopard and have a macbook (unibody). I had the same problems as you. The modifications on this site worked on 10.5, but stopped on 10.6.1. Anyway, I used Gav C's earlier post (see above) and downloaded the plugin.

I then created a folder called (Nokia-6300.phoneplugin) and placed the contents of the downloaded plugin into this folder. I then copied this new folder into iSync's package
/Applications/iSync.app/Contents/Plugins/ApplePhoneConduit.syncdevice/Contents/PlugIns

You'll notice all the other Nokia models within this folder.

Now start iSync and it should work every time!

navi @ 10.10.2009 23:44 CEST
isync STILL doesn't support nokia 6300.. i tried everything twice. first time having problems with mac at all.. maybe i'm just used to everything working just fine

Frank @ 12.10.2009 21:32 CEST
I had the same issue with iSync crashing while adding the 6300 to iSync.
I got it working, as I copied the Nokia 6133 Plugin in /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/PlugIns/Nokia-6133.phoneplugin to /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/PlugIns/Nokia-6300.phoneplugin

In the plugin I opened the MetaClasses.plist and changed every 6133 value to 6300. Saved it and tried it and it worked!!

Jeff @ 14.10.2009 17:53 CEST
I followed Frank's advice, and it worked perfectly, with a Nokia 6301 on a Mac running Snow Leopard. The only thing I would add to Frank's comments is that I had to change every 6133 value to 6301 in every file in the folder in which those values occur, rather than just in the metaclasses file. Thanks, Frank.

Jamie Goodwin @ 20.10.2009 12:52 CEST
I've also followed Frank's advice and it all connects and syncs, however when I went to enable calendar synchronisation it told me I did not have any sync enabled calendars!
The exact message is;
"No writeable calendars found"
"Before you can synchronize your calendars, you need to open a calendar application that supports synchronization and create at least one writable calendar."
Then it has a button for cancel and for open iCal.
Any ideas?

r4ds @ 23.10.2009 08:41 CEST
The Nokia 6300 ticked every box. Looks stylish - and has great functionlity. Its not too hard on the old pocket either, i got mine from tesco contract mobile and have to say - it was sent the next day and had no problems. Im really happy with it and would definatley recommend it.

Felix @ 24.10.2009 07:50 CEST
Hi.

Thanks a lot!!! I'm syncing my nokia 6300 with Snow Leopard 10.6.1. I was looking for this long time ago, since SL was released.

Thomson @ 16.11.2009 12:23 CEST
Thank you very much. It´s just amazing that this works and it saved me so much time. In fact I just bought this great dependable phone after I found this thread, because for me it is absolutely indispensable to synchronize my business calendar. I wouldn´t have bought it if this wasn´t possible. Nokia should pay you for this ;-)

Alexander @ 19.11.2009 21:54 CEST
Vielen Dank, hat sehr gut funktioniert.

Susanne @ 21.11.2009 11:40 CEST
Great work, very understandable explanation and great function! Congrats!

Markus @ 23.11.2009 16:53 CEST
This were the most helpful "10 rows" I ever found in the net for a real big problem, thank you very very much! Great!

Fuchur @ 14.12.2009 23:56 CEST
Thank you very much!
No it works.

tab @ 12.02.2010 15:43 CEST
Thank you very much - works just great!

Michaela @ 05.03.2010 03:21 CEST
Thank you very much for sharing this really valuable information! I almost received grey hair about this problem, and there it comes in an easy understanding and simply comprehensible way... Great work and great social conscience! Thanks a lot.

Mike140 @ 10.05.2010 20:57 CEST
Now isync STILL doesn't support nokia 6300. Thank you very much for this little manual. It works great! I use OS X 10.5.8 with ical 3.0.8.

buitenkeuken @ 14.05.2010 09:45 CEST
Thanks a lot for your great solution been searching like crazy for a solution to this issue.

vlklng @ 15.06.2010 19:18 CEST
Worked on Snow Leopard 10.6.3 Just replaced the "6280" by "6300" (5 times in the file) and added the TIFF.

No new comments allowed (anymore) on this post.

LiveSearch

Categories

Latest Comments

Archive

Login

How to iSync a Nokia 6300

Comments